ICL node: timeout in CAN communication.
شرح
The DTC is set active if the CAN message TimeDate-ICL has been absent for 5000 ms. The DTC is set inactive when the CAN-message TimeDate-ICL is received. The DTC is not set in the following cases: • ignition is turned off • first 2 seconds after ignition on • system voltage is below 22 volt • system voltage is above 30 volt • short circuit or open circuit on the CAN bus (separate DTCs)
علت
* Faulty ICL unit * ICL unit disconnected from the Yellow CAN bus * COO is not forwarding messages from the ICL to the Sensor CAN bus
