EBS node: timeout in CAN communication.
شرح
The DTC is set active if the CAN message ElectronicBrakeController1-A has been absent for 500 ms. The DTC is set inactive when the CAN message ElectronicBrakeController1-A is received. The DTC is not set in the following cases: • ignition is turned off • first 2 seconds after ignition on • system voltage is below 22 volt • system voltage is above 30 volt • short circuit or open circuit on the CAN bus (separate DTCs)
علت
• Faulty EBS unit • EBS unit disconnected from the CAN bus
