Sub wake-up bus short circuit to ground.
شرح
The DTC is set active if the feedback of pin A10 (sub wake-up bus) is low even though DAS is trying to set it high for more than 1000ms. The DTC is set inactive if the feedback of pin A10 is high when DAS is trying to set it high for more than 1000ms. The DTC is not set in the following cases: • first 2 seconds after ignition on • system voltage is below 22V • system voltage is above 32V
علت
• Defect wiring or connectors for the sub wake-up bus. • Electrical error in any of the connected modules.
