Forward Looking Camera (FLC) reports internal error.
شرح
The DTC is set to active if: CAN message GeneralInfoFLCProp:FLCSensorStatus has values 4-13 (reserved) , 14 (error) or 15 (not available) for more than 3 seconds. CAN message GeneralInfoFLCProp:FLCSensorStatus has value 1 (Warming up/Initializing) for more than 7 seconds at startup. The DTC is set to inactive if: CAN message GeneralInfoFLCProp:FLCSensorStatus is received and has value within 0-3. The DTC is not set in the following cases: • Ignition is turned off. • First 2 seconds after ignition on. • System voltage is below 22V • System voltage is above 32V • When the FLC is in init phase. This may last for 10 seconds after ingintion on. • When the FLC is performing SPC (single point calibratioin). This may last for 8 seconds. • When vehicle speed is under 2 km/h.
علت
The camera has an internal fault.
